Virgin Hair

Step 1 - Shampoo hair 3 times (coarse texture) or 2 times (Fine texture) with BS12

BIOsmooth Shampoo to help open the cuticle & towel dry. If required Spray the BS18

2 phase leave in to detangle the hair which also works as a porosity balancer.

Remove the excess water using a hair dryer and dry 100%.

Step 2 – Divide the hair into 4 big sections. Start applying the BIOsmooth treatment in 2

to 4 cm sections (1 – 1.5 inches sections) leaving half an inch from the root. Start from

the back sections. Apply with a tinting brush and use a fine-tooth comb to spread the

product length wise, and then comb the hair back.

Apply enough product

Medium length hair: 60 – 80 ml (Depending on density)

Long hair: 80 – 120 ml (Depending on density)

Step 3 – Keep the product for at least 60 mins (Fine texture) – 70 mins (Coarse & Curly

texture)

Step 4 - Rinse 80% of the product at the backwash

Step 5 – Towel dry and comb it evenly with paddle brush in straight direction

downwards. Dry at zero degree with medium heat in a straight direction downwards and

then blow dry with full heat using a round brush (Recommended) or paddle brush.

Step 6 –. Flat iron – Temperature 200 to 230 degrees. 12 to 15 strokes as per the

desired results.

Step 7 - After Flat iron, wait for 8 to 10 mins. Rinse hair & apply BIOsmooth

conditioner (For normal hair) and leave for 5 t0 8 mins.

Step 8 – Towel dry the hair & apply BIOsmooth leave in mask.

Step 9 – Blast dry the hair 100% using fingers.

Step 10 – Don’t forget to recommend BIOsmooth BS12 shampoo + BIOsmooth BS16

conditioner + BIOsmooth BS10 leave on mask + BIOsmooth BS18 Leave in conditioner

for home care which helps maintaining the ph balance & also make the treatment last

longer

Coloured or Highlighted Hair

Step 1 - Shampoo 2 times with BS12 BIOsmooth Shampoo to help open the cuticle &

towel dry. If required Spray the BS18 2 phase leave in to detangle the hair which also

works as a porosity balancer.Remove the excess water using a hair dryer & dry 100%.

Step 2 – Divide the hair into 4 big sections. Use Gloves. Start applying the BIOsmooth

treatment in 2 to 4 cm sections (1 – 1.5 inches sections) leaving half an inch from the

root.

Start from the back sections. Apply with a tinting brush and use a fine-tooth comb to

spread the product length wise. Then comb the hair back, avoiding contact with the

face.

Apply enough product

Medium length hair: 60 – 80 ml (Depending on density)

Long hair: 80 – 120 ml (Depending on density)

Step 3 – Keep the product for at least 60 mins (Fine texture) – 70 mins (Coarse & Curly

texture)

Step 4 - Rinse 80% of the product at the backwash

Step 5 - Towel dry and comb it evenly with paddle brush in straight direction

downwards. Dry at zero degree with medium heat in a straight direction downwards and

then Blow dry with full heat using a round brush (recommended) or paddle brush.

Step 6 - Flat iron – Temperature 190 to 210 degrees. 12 to 15 strokes as per the desired

results.

Step 7 – After Flat iron, wait for 8 to 10 mins. Rinse hair & apply BIOsmooth

conditioner (For normal hair) or apply ABH Repair Mask (For Bleached and Coloured

hair) and leave for 5 to 8 mins.

Step 8 – Towel dry the hair & apply BIOsmooth leave in mask

Step 9 – Blast dry the hair 100%

Step 10 – Don’t forget to recommend BIOsmooth BS12 shampoo + BIOsmooth BS16

conditioner + BIOsmooth BS10 leave on mask + BIOsmooth BS18 Leave in conditioner

for home care which helps maintaining the ph balance & also make the treatment last

longer

Sensitized or Over Processed Hair

Step 1 - Shampoo 1 time with BS12 BIOsmooth Shampoo. Remove the excess

water using a hair dryer.If required Spray the BS18 2 phase leave in to detangle the

hair which also works as a porosity balancer.

Remove the excess water using a hair dryer and dry 80%.

Step 2 – Divide the hair into 4 big sections. Use Gloves. Start applying the BIOsmooth

treatment in 2 to 4 cm sections (1 – 1.5 inches sections) leaving half an inch from the

root.

Start from the back sections. Apply with a tinting brush and use a fine-tooth comb to

spread the product length wise. Then comb the hair back, avoiding contact with the

face.

Apply enough product

Medium length hair: 60 – 80 ml (Depending on density)

Long hair: 80 – 120 ml (Depending on density)

Step 3 - Keep the product for 45 mins

Step 4 - Rinse the product 80% to 90%

Step 5 - Towel dry and comb it evenly with paddle brush in straight direction

downwards. Dry at zero degree with medium heat in a straight direction downwards and

then Blow dry with full heat using a round brush(Recommended) or paddle brush.

Step 6 - Flat iron – Temperature 180 to 190 degrees. 8 to 10 strokes as per the desired

results.

Step 7 – After Flat iron, wait for 8 to 10 mins. Rinse hair & apply apply ABH Repair

mask (For Bleached and Coloured hair) and leave for 10 mins

Step 8 – Towel dry the hair & apply BIOsmooth leave in mask.

Step 9 – Blast dry the hair 100%

Step 10 – Don’t forget to recommend BIOsmooth BS12 shampoo + BIOsmooth BS16

conditioner + BIOsmooth BS10 leave on mask + BIOsmooth BS18 Leave in conditioner

for home care which helps maintaining the ph balance & also make the treatment last

longer